Mercurial > hp34970-firmware / changeset
changeset
Update the custom target HP34970_FP_303RD
Sun, 25 Oct 2020 17:02:53 +0100
- author
- David Douard <david.douard@sdf3.org>
- date
- Sun, 25 Oct 2020 17:02:53 +0100
- changeset 30
- 71be284c66b3
- parent 29
- 276195d58a1d
- child 31
- 794401fbd5d5
Update the custom target HP34970_FP_303RD
update the platformio.ini:
remove unused flags, and configure so it uses includes from the project's root
directory (in TARGET_HP34970_FP_F303RD) so these .h/.c files do not conflict
when compiling for other targets.
Add a TARGET_HP34970_FR_F303RD/ for target specific headers/linker files.
Add a src/TARGET_HP34970_FR_F303RD/ for c files (protected by '#if defined'
statments).
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_HP34970_FP_F303RD/PeripheralNames.h Sun Oct 25 17:02:53 2020 +0100 @@ -0,0 +1,96 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + ADC_1 = (int)ADC1_BASE, + ADC_2 = (int)ADC2_BASE, + ADC_3 = (int)ADC3_BASE, + ADC_4 = (int)ADC4_BASE +} ADCName; + +typedef enum { + DAC_1 = (int)DAC_BASE +} DACName; + +typedef enum { + UART_1 = (int)USART1_BASE, + UART_2 = (int)USART2_BASE, + UART_3 = (int)USART3_BASE, + UART_4 = (int)UART4_BASE, + UART_5 = (int)UART5_BASE +} UARTName; + +#define DEVICE_SPI_COUNT 4 +typedef enum { + SPI_1 = (int)SPI1_BASE, + SPI_2 = (int)SPI2_BASE, + SPI_3 = (int)SPI3_BASE, + SPI_4 = (int)SPI4_BASE +} SPIName; + +typedef enum { + I2C_1 = (int)I2C1_BASE, + I2C_2 = (int)I2C2_BASE, + I2C_3 = (int)I2C3_BASE +} I2CName; + +typedef enum { + PWM_1 = (int)TIM1_BASE, + PWM_2 = (int)TIM2_BASE, + PWM_3 = (int)TIM3_BASE, + PWM_4 = (int)TIM4_BASE, + PWM_8 = (int)TIM8_BASE, + PWM_15 = (int)TIM15_BASE, + PWM_16 = (int)TIM16_BASE, + PWM_17 = (int)TIM17_BASE, + PWM_20 = (int)TIM20_BASE +} PWMName; + +typedef enum { + CAN_1 = (int)CAN_BASE +} CANName; + +typedef enum { + USB_FS = (int)USB_BASE, +} USBName; + +#ifdef __cplusplus +} +#endif + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_HP34970_FP_F303RD/PeripheralPinMaps.h Sun Oct 25 17:02:53 2020 +0100 @@ -0,0 +1,351 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2018, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +//============================================================================== +// Notes +// +// - The pins mentioned Px_y_ALTz are alternative possibilities which use other +// HW peripheral instances. You can use them the same way as any other "normal" +// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board +// pinout image on mbed.org. +// +// - The pins which are connected to other components present on the board have +// the comment "Connected to xxx". The pin function may not work properly in this +// case. These pins may not be displayed on the board pinout image on mbed.org. +// Please read the board reference manual and schematic for more information. +// +// - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented +// See https://os.mbed.com/teams/ST/wiki/STDIO for more information. +// +//============================================================================== + +#ifndef MBED_PERIPHERALPINMAPS_H +#define MBED_PERIPHERALPINMAPS_H + +#include "PinNamesTypes.h" +#include <mstd_cstddef> + +//*** ADC *** +//*** ADC *** + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_ADC[] = { + {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 + {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 +// {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 // Connected to STDIO_UART_TX +// {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 // Connected to STDIO_UART_RX + {PA_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 +// {PA_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 // Connected to LD2 [Green Led] + {PA_6, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 + {PA_7, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 + {PB_0, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12 + {PB_1, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 + {PB_2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12 + {PB_11, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 + {PB_11_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14 + {PB_12, ADC_4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC4_IN3 + {PB_13, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 + {PB_14, ADC_4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC4_IN4 + {PB_15, ADC_4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC4_IN5 + {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 + {PC_0_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 + {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 + {PC_1_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7 + {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 + {PC_2_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8 + {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 + {PC_3_ALT0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9 + {PC_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5 + {PC_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11 + {NC, NC, 0} +}; + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_ADC_Internal[] = { + {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16 + {ADC_VREF1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_IN18 + {ADC_VREF2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC2_IN18 + {ADC_VREF3, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC3_IN18 + {ADC_VREF4, ADC_4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC4_IN18 + {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_IN17 + {ADC_VOPAMP1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 + {ADC_VOPAMP2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC2_IN17 + {ADC_VOPAMP3, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC3_IN17 + {ADC_VOPAMP4, ADC_4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC4_IN17 + {NC, NC, 0} +}; + +//*** DAC *** + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_DAC[] = { + {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 + {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2 // Connected to LD2 [Green Led] + {NC, NC, 0} +}; + +//*** I2C *** + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_I2C_SDA[] = { + {PA_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PA_14, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // Connected to TCK + {PB_5, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C3)}, + {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)}, +// {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Connected to RCC_OSC_IN + {NC, NC, 0} +}; + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_I2C_SCL[] = { + {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)}, + {PA_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PA_15, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, +// {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Connected to RCC_OSC_OUT + {NC, NC, 0} +}; + +//*** PWM *** + +// TIM2 cannot be used because already used by the us_ticker +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_PWM[] = { +// {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 +// {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + {PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N +// {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 // Connected to STDIO_UART_TX +// {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1 // Connected to STDIO_UART_TX +// {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 // Connected to STDIO_UART_RX +// {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2 // Connected to STDIO_UART_RX + {PA_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 +// {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 // Connected to LD2 [Green Led] + {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N + {PA_7_ALT2, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2 +// {PA_9, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3 + {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3 +// {PA_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4 + {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N + {PA_11_ALT0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4 + {PA_11_ALT1, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 1, 0)}, // TIM4_CH1 + {PA_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N + {PA_12_ALT0, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 2, 0)}, // TIM4_CH2 + {PA_12_ALT1, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 + {PA_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 3, 0)}, // TIM4_CH3 // Connected to TMS + {PA_13_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N // Connected to TMS + {PA_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 2, 0)}, // TIM8_CH2 // Connected to TCK +// {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + {PA_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM8, 1, 0)}, // TIM8_CH1 + {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + {PB_0_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N + {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N +// {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 // Connected to SWO + {PB_3, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N // Connected to SWO + {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PB_4_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N + {PB_4_ALT1, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 + {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PB_5_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + {PB_5_ALT1, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 + {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 + {PB_6_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 1, 0)}, // TIM8_CH1 + {PB_6_ALT1, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4 + {PB_7_ALT0, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 + {PB_7_ALT1, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 + {PB_8_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 2, 0)}, // TIM8_CH2 + {PB_8_ALT1, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 + {PB_9_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 3, 0)}, // TIM8_CH3 + {PB_9_ALT1, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 +// {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 +// {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT0, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {PC_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PC_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PC_2, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PC_3, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PC_6_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 0)}, // TIM8_CH1 + {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PC_7_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 0)}, // TIM8_CH2 + {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + {PC_8_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 0)}, // TIM8_CH3 + {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + {PC_9_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 4, 0)}, // TIM8_CH4 + {PC_10, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N + {PC_11, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N + {PC_12, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N + {PC_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N // Connected to B1 [Blue PushButton] +// {PF_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N // Connected to RCC_OSC_IN + {NC, NC, 0} +}; + +//*** SERIAL *** + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_UART_TX[] = { + {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_TX + {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to TCK + {PB_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to SWO + {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_10_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)}, + {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)}, + {NC, NC, 0} +}; + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_UART_RX[] = { + {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_RX + {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PB_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_5, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_11_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)}, + {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)}, + {NC, NC, 0} +}; + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_UART_RTS[] = { + {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {NC, NC, 0} +}; + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_UART_CTS[] = { + {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PA_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to TMS + {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {NC, NC, 0} +}; + +//*** SPI *** + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PA_11, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PB_5_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {NC, NC, 0} +}; + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PA_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PB_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {NC, NC, 0} +}; + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to LD2 [Green Led] + {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to SWO + {PB_3_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // Connected to SWO + {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, + {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, +// {PF_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to RCC_OSC_OUT + {NC, NC, 0} +}; + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PA_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PA_15_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, + {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, +// {PF_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to RCC_OSC_IN + {NC, NC, 0} +}; + +//*** CAN *** + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_CAN_RD[] = { + {PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, + {PB_8, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, + {NC, NC, 0} +}; + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_CAN_TD[] = { + {PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, + {PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, + {NC, NC, 0} +}; + +//*** USBDEVICE *** + +MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_USB_FS[] = { + {PA_11, USB_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM + {PA_12, USB_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP + {NC, NC, 0} +}; + +#define PINMAP_ANALOGIN PinMap_ADC +#define PINMAP_ANALOGIN_INTERNAL PinMap_ADC_Internal +#define PINMAP_ANALOGOUT PinMap_DAC +#define PINMAP_I2C_SDA PinMap_I2C_SDA +#define PINMAP_I2C_SCL PinMap_I2C_SCL +#define PINMAP_UART_TX PinMap_UART_TX +#define PINMAP_UART_RX PinMap_UART_RX +#define PINMAP_UART_CTS PinMap_UART_CTS +#define PINMAP_UART_RTS PinMap_UART_RTS +#define PINMAP_SPI_SCLK PinMap_SPI_SCLK +#define PINMAP_SPI_MOSI PinMap_SPI_MOSI +#define PINMAP_SPI_MISO PinMap_SPI_MISO +#define PINMAP_SPI_SSEL PinMap_SPI_SSEL +#define PINMAP_PWM PinMap_PWM +#define PINMAP_CAN_RD PinMap_CAN_RD +#define PINMAP_CAN_TD PinMap_CAN_TD + +#endif \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_HP34970_FP_F303RD/PinNames.h Sun Oct 25 17:02:53 2020 +0100 @@ -0,0 +1,246 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2018, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" +#include "PinNamesTypes.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* If this macro is defined, then constexpr utility functions for pin-map seach can be used. */ +#define STATIC_PINMAP_READY 1 + +typedef enum { + ALT0 = 0x100, + ALT1 = 0x200, + ALT2 = 0x300, + ALT3 = 0x400 +} ALTx; + +typedef enum { + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_4_ALT0 = PA_4 | ALT0, + PA_5 = 0x05, + PA_6 = 0x06, + PA_6_ALT0 = PA_6 | ALT0, + PA_7 = 0x07, + PA_7_ALT0 = PA_7 | ALT0, + PA_7_ALT1 = PA_7 | ALT1, + PA_7_ALT2 = PA_7 | ALT2, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_11_ALT0 = PA_11 | ALT0, + PA_11_ALT1 = PA_11 | ALT1, + PA_12 = 0x0C, + PA_12_ALT0 = PA_12 | ALT0, + PA_12_ALT1 = PA_12 | ALT1, + PA_13 = 0x0D, + PA_13_ALT0 = PA_13 | ALT0, + PA_14 = 0x0E, + PA_15 = 0x0F, + PA_15_ALT0 = PA_15 | ALT0, + + PB_0 = 0x10, + PB_0_ALT0 = PB_0 | ALT0, + PB_0_ALT1 = PB_0 | ALT1, + PB_1 = 0x11, + PB_1_ALT0 = PB_1 | ALT0, + PB_1_ALT1 = PB_1 | ALT1, + PB_2 = 0x12, + PB_3 = 0x13, + PB_3_ALT0 = PB_3 | ALT0, + PB_4 = 0x14, + PB_4_ALT0 = PB_4 | ALT0, + PB_4_ALT1 = PB_4 | ALT1, + PB_5 = 0x15, + PB_5_ALT0 = PB_5 | ALT0, + PB_5_ALT1 = PB_5 | ALT1, + PB_6 = 0x16, + PB_6_ALT0 = PB_6 | ALT0, + PB_6_ALT1 = PB_6 | ALT1, + PB_7 = 0x17, + PB_7_ALT0 = PB_7 | ALT0, + PB_7_ALT1 = PB_7 | ALT1, + PB_8 = 0x18, + PB_8_ALT0 = PB_8 | ALT0, + PB_8_ALT1 = PB_8 | ALT1, + PB_9 = 0x19, + PB_9_ALT0 = PB_9 | ALT0, + PB_9_ALT1 = PB_9 | ALT1, + PB_10 = 0x1A, + PB_11 = 0x1B, + PB_11_ALT0 = PB_11 | ALT0, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_14_ALT0 = PB_14 | ALT0, + PB_15 = 0x1F, + PB_15_ALT0 = PB_15 | ALT0, + PB_15_ALT1 = PB_15 | ALT1, + + PC_0 = 0x20, + PC_0_ALT0 = PC_0 | ALT0, + PC_1 = 0x21, + PC_1_ALT0 = PC_1 | ALT0, + PC_2 = 0x22, + PC_2_ALT0 = PC_2 | ALT0, + PC_3 = 0x23, + PC_3_ALT0 = PC_3 | ALT0, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_6_ALT0 = PC_6 | ALT0, + PC_7 = 0x27, + PC_7_ALT0 = PC_7 | ALT0, + PC_8 = 0x28, + PC_8_ALT0 = PC_8 | ALT0, + PC_9 = 0x29, + PC_9_ALT0 = PC_9 | ALT0, + PC_10 = 0x2A, + PC_10_ALT0 = PC_10 | ALT0, + PC_11 = 0x2B, + PC_11_ALT0 = PC_11 | ALT0, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_2 = 0x32, + + PF_0 = 0x50, + PF_1 = 0x51, + + // ADC internal channels + ADC_TEMP = 0xF0, + ADC_VREF1 = 0xF1, + ADC_VREF2 = 0xF2, + ADC_VREF3 = 0xF3, + ADC_VREF4 = 0xF4, + ADC_VREF = ADC_VREF1, + ADC_VBAT = 0xF5, + ADC_VOPAMP1 = 0xF6, + ADC_VOPAMP2 = 0xF7, + ADC_VOPAMP3 = 0xF8, + ADC_VOPAMP4 = 0xF9, + + // Arduino connector namings + A0 = PA_0, + A1 = PA_1, + A2 = PA_4, + A3 = PB_0, + A4 = PC_1, + A5 = PC_0, + D0 = PA_3, + D1 = PA_2, + D2 = PA_10, + D3 = PB_3, + D4 = PB_5, + D5 = PB_4, + D6 = PB_10, + D7 = PA_8, + D8 = PA_9, + D9 = PC_7, + D10 = PB_6, + D11 = PA_7, + D12 = PA_6, + D13 = PA_5, + D14 = PB_9, + D15 = PB_8, + + // STDIO for console print +#ifdef MBED_CONF_TARGET_STDIO_UART_TX + STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX, +#else + STDIO_UART_TX = PA_2, +#endif +#ifdef MBED_CONF_TARGET_STDIO_UART_RX + STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX, +#else + STDIO_UART_RX = PA_3, +#endif + + // Generic signals namings + LED1 = PA_5, + LED2 = PA_5, + LED3 = PA_5, + LED4 = PA_5, + USER_BUTTON = PC_13, + // Standardized button names + BUTTON1 = USER_BUTTON, + SERIAL_TX = STDIO_UART_TX, + SERIAL_RX = STDIO_UART_RX, + USBTX = STDIO_UART_TX, + USBRX = STDIO_UART_RX, + I2C_SCL = PB_8, + I2C_SDA = PB_9, + SPI_MOSI = PA_7, + SPI_MISO = PA_6, + SPI_SCK = PA_5, + SPI_CS = PB_6, + PWM_OUT = PB_4, + + /**** USB pins ****/ + USB_DM = PA_11, + USB_DP = PA_12, + + /**** OSCILLATOR pins ****/ + RCC_OSC32_IN = PC_14, + RCC_OSC32_OUT = PC_15, + RCC_OSC_IN = PF_0, + RCC_OSC_OUT = PF_1, + + /**** DEBUG pins ****/ + SYS_JTCK_SWCLK = PA_14, + SYS_JTDI = PA_15, + SYS_JTDO_TRACESWO = PB_3, + SYS_JTMS_SWDIO = PA_13, + SYS_NJTRST = PB_4, + SYS_WKUP1 = PA_0, + SYS_WKUP2 = PC_13, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +#ifdef __cplusplus +} +#endif + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_HP34970_FP_F303RD/STM32F303XE.ld Sun Oct 25 17:02:53 2020 +0100 @@ -0,0 +1,203 @@ +/* Linker script to configure memory regions. */ +/* + * SPDX-License-Identifier: BSD-3-Clause + ****************************************************************************** + * @attention + * + * Copyright (c) 2016-2020 STMicroelectronics. + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** +*/ + +#include "cmsis_nvic.h" + + +#if !defined(MBED_APP_START) + #define MBED_APP_START MBED_ROM_START +#endif + +#if !defined(MBED_APP_SIZE) + #define MBED_APP_SIZE MBED_ROM_SIZE +#endif + +#if !defined(MBED_BOOT_STACK_SIZE) + /* This value is normally defined by the tools + to 0x1000 for bare metal and 0x400 for RTOS */ + #define MBED_BOOT_STACK_SIZE 0x400 +#endif + +/* Round up VECTORS_SIZE to 8 bytes */ +#define VECTORS_SIZE (((NVIC_NUM_VECTORS * 4) + 7) & 0xFFFFFFF8) + +MEMORY +{ + FLASH (rx) : ORIGIN = MBED_APP_START, LENGTH = MBED_APP_SIZE + RAM (rwx) : ORIGIN = MBED_RAM_START + VECTORS_SIZE, LENGTH = MBED_RAM_SIZE - VECTORS_SIZE +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(8); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(8); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(8); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(8); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + /* Uninitialized data section + * This region is not initialized by the C/C++ library and can be used to + * store state across soft reboots. */ + .uninitialized (NOLOAD): + { + . = ALIGN(32); + __uninitialized_start = .; + *(.uninitialized) + KEEP(*(.keep.uninitialized)) + . = ALIGN(32); + __uninitialized_end = .; + } > RAM + + .bss : + { + . = ALIGN(8); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(8); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + PROVIDE(end = .); + *(.heap*) + . = ORIGIN(RAM) + LENGTH(RAM) - MBED_BOOT_STACK_SIZE; + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - MBED_BOOT_STACK_SIZE; + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_HP34970_FP_F303RD/cmsis_nvic.h Sun Oct 25 17:02:53 2020 +0100 @@ -0,0 +1,39 @@ +/* mbed Microcontroller Library + * SPDX-License-Identifier: BSD-3-Clause + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2016-2020 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** +*/ + +#ifndef MBED_CMSIS_NVIC_H +#define MBED_CMSIS_NVIC_H + +#if !defined(MBED_ROM_START) +#define MBED_ROM_START 0x8000000 +#endif + +#if !defined(MBED_ROM_SIZE) +#define MBED_ROM_SIZE 0x80000 // 512 KB +#endif + +#if !defined(MBED_RAM_START) +#define MBED_RAM_START 0x20000000 +#endif + +#if !defined(MBED_RAM_SIZE) +#define MBED_RAM_SIZE 0x10000 // 64 KB +#endif + +#define NVIC_NUM_VECTORS 101 +#define NVIC_RAM_VECTOR_ADDRESS MBED_RAM_START + +#endif
--- a/boards/hp34970_fp.json Sun Oct 25 16:58:38 2020 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,34 +0,0 @@ -{ - "build": { - "cpu": "cortex-m4", - "extra_flags": "-DSTM32F303xE", - "f_cpu": "72000000L", - "mcu": "stm32f303rdt7", - "product_line": "STM32F303xE", - "variant": "NUCLEO_F303RE" - }, - "debug": { - "default_tools": [ - "stlink" - ], - "jlink_device": "STM32F303RE", - "openocd_target": "stm32f3x", - "svd_path": "STM32F30x.svd" - }, - "frameworks": ["mbed"], - "platforms": ["ststm32"], - "name": "HP34970 Replace Front Panel Board (STM32F303RD, 64k RAM, 384k Flash)", - "upload": { - "maximum_ram_size": 65536, - "maximum_size": 393216, - "protocol": "stlink", - "protocols": [ - "jlink", - "stlink", - "blackmagic", - "mbed" - ] - }, - "url": "https://whatever.sdfa3.org/", - "vendor": "Custom" -}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/boards/hp34970_fp_f303rd.json Sun Oct 25 17:02:53 2020 +0100 @@ -0,0 +1,33 @@ +{ + "build": { + "cpu": "cortex-m4", + "extra_flags": "-DSTM32F303xE", + "f_cpu": "72000000L", + "mcu": "stm32f303rdt7", + "product_line": "STM32F303xE" + }, + "debug": { + "default_tools": [ + "stlink" + ], + "jlink_device": "STM32F303RE", + "openocd_target": "stm32f3x", + "svd_path": "STM32F30x.svd" + }, + "frameworks": ["mbed"], + "platforms": ["ststm32"], + "name": "HP34970 Replace Front Panel Board (STM32F303RD, 64k RAM, 384k Flash)", + "upload": { + "maximum_ram_size": 65536, + "maximum_size": 393216, + "protocol": "stlink", + "protocols": [ + "jlink", + "stlink", + "blackmagic", + "mbed" + ] + }, + "url": "https://whatever.sdfa3.org/", + "vendor": "Custom" +}
--- a/platformio.ini Sun Oct 25 16:58:38 2020 +0100 +++ b/platformio.ini Sun Oct 25 17:02:53 2020 +0100 @@ -38,13 +38,11 @@ [env:fp] platform = ststm32 framework = mbed -platform_packages = framework-mbed -board = hp34970_fp -#build_flags = -DHAVE_PC --verbose -#-DDEVICE_SPI_ASYNCH=1 -board_build.mbed.ldscript = $PROJECTSRC_DIR/TARGET_STM32F303xE/device/TOOLCHAIN_GCC_ARM/STM32F303XE.ld +board = hp34970_fp_f303rd +board_build.mbed.ldscript = + $PROJECTSRC_DIR/../TARGET_HP34970_FP_F303RD/STM32F303XE.ld build_flags = - -DHAVE_PC - -I$PROJECTSRC_DIR/TARGET_STM32F303xE - -I$PROJECTSRC_DIR/TARGET_STM32F303xE/device - -I$PROJECTSRC_DIR/TARGET_STM32F303xE/TARGET_NUCLEO_F303RE + -DHAVE_PC + -I$PROJECTSRC_DIR/../TARGET_HP34970_FP_F303RD +debug_tool = stlink +upload_protocol = dfu
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/TARGET_HP34970_FP_F303RD/PeripheralPins.c Sun Oct 25 17:02:53 2020 +0100 @@ -0,0 +1,35 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2018, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#if defined(TARGET_HP34970_FP_F303RE) +#include "PeripheralPins.h" +#include "mbed_toolchain.h" +#include "PeripheralPinMaps.h" +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/TARGET_HP34970_FP_F303RD/system_clock.c Sun Oct 25 17:02:53 2020 +0100 @@ -0,0 +1,225 @@ +/* mbed Microcontroller Library +* Copyright (c) 2006-2017 ARM Limited +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*/ + +/** + * This file configures the system clock as follows: + *----------------------------------------------------------------------------- + * System clock source | 1- USE_PLL_HSE_EXTC (external 8 MHz clock) + * | 2- USE_PLL_HSE_XTAL (external 8 MHz xtal) + * | 3- USE_PLL_HSI (internal 8 MHz) + *----------------------------------------------------------------------------- + * SYSCLK(MHz) | 72 + * AHBCLK (MHz) | 72 + * APB1CLK (MHz) | 36 + * APB2CLK (MHz) | 72 + * USB capable | YES + *----------------------------------------------------------------------------- + */ + +#if defined(TARGET_HP34970_FP_F303RE) + +#include "stm32f3xx.h" +#include "mbed_error.h" + +// clock source is selected with CLOCK_SOURCE in json config +#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO) +#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default) +#define USE_PLL_HSI 0x2 // Use HSI internal clock + +#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) ) +uint8_t SetSysClock_PLL_HSE(uint8_t bypass); +#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */ + +#if ((CLOCK_SOURCE) & USE_PLL_HSI) +uint8_t SetSysClock_PLL_HSI(void); +#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting, vector table location and the PLL configuration is reset. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); /* set CP10 and CP11 Full Access */ +#endif + + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= 0x00000001U; + + /* Reset CFGR register */ + RCC->CFGR &= 0xF87FC00CU; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= 0xFEF6FFFFU; + + /* Reset HSEBYP bit */ + RCC->CR &= 0xFFFBFFFFU; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE bits */ + RCC->CFGR &= 0xFF80FFFFU; + + /* Reset PREDIV1[3:0] bits */ + RCC->CFGR2 &= 0xFFFFFFF0U; + + /* Reset USARTSW[1:0], I2CSW and TIMs bits */ + RCC->CFGR3 &= 0xFF00FCCCU; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000U; +} + + +/** + * @brief Configures the System clock source, PLL Multiplier and Divider factors, + * AHB/APBx prescalers and Flash settings + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ + +void SetSysClock(void) +{ +#if ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) + /* 1- Try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(1) == 0) +#endif + { +#if ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) + /* 2- If fail try to start with HSE and external xtal */ + if (SetSysClock_PLL_HSE(0) == 0) +#endif + { +#if ((CLOCK_SOURCE) & USE_PLL_HSI) + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == 0) +#endif + { + { + error("SetSysClock failed\n"); + } + } + } + } + + /* Output clock on MCO2 pin(PC9) for debugging purpose */ + //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); +} + +#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) ) +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSE(uint8_t bypass) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; + + /* Enable HSE oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == 0) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */ + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */ + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; // 72 MHz (8 MHz * 9) + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + return 0; // FAIL + } + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 72 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 72 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 36 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 72 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + return 0; // FAIL + } + + RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) { + return 0; // FAIL + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + //if (bypass == 0) + // HAL_RCC_MCOConfig(RCC_MCO, RCC_MCOSOURCE_HSE, RCC_MCO_DIV2); // 4 MHz with xtal + //else + // HAL_RCC_MCOConfig(RCC_MCO, RCC_MCOSOURCE_HSE, RCC_MCO_DIV1); // 8 MHz with ext clock + + return 1; // OK +} +#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */ + +#if ((CLOCK_SOURCE) & USE_PLL_HSI) +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSI(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; + grr; + + /* Enable HSI oscillator and activate PLL with HSI as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; // 72 MHz (8 MHz/1 * 9) + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + return 0; // FAIL + } + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 72 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 72 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 36 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 72 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + return 0; // FAIL + } + + RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) { + return 0; // FAIL + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + //HAL_RCC_MCOConfig(RCC_MCO, RCC_MCOSOURCE_HSI, RCC_MCO_DIV1); // 8 MHz + + return 1; // OK +} +#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */ + +#endif /* TARGET_HP34970_FP_F303RE */
