# HG changeset patch
# User David Douard <david.douard@logilab.fr>
# Date 1519770741 -3600
# Node ID 4d8bca9ff106699d4000ef258d8997ccad0e11c3
# Parent  d676fee7e96056c1b3783f5ccab65b912e01b068
[eip545b] few typos

diff -r d676fee7e960 -r 4d8bca9ff106 content/eip545b.rst
--- a/content/eip545b.rst	Thu Feb 15 18:48:46 2018 +0100
+++ b/content/eip545b.rst	Tue Feb 27 23:32:21 2018 +0100
@@ -124,10 +124,10 @@
    :alt: Testing a 1GHz signal on band 3 input
 
 
-I've checked up 2GHz (the max frequency I can generate using my Anristu MG3670B
+I've checked up 2GHz, the max frequency I can generate using my Anristu MG3670B
 signal generator.
 
-A quick test showed that the sensibility is not as expected: could not measure
+A quick test showed that the sensitivity is not as expected: could not measure
 any signal below -12 ou -13dBm.
 
 
diff -r d676fee7e960 -r 4d8bca9ff106 content/eip545b_2.rst
--- a/content/eip545b_2.rst	Thu Feb 15 18:48:46 2018 +0100
+++ b/content/eip545b_2.rst	Tue Feb 27 23:32:21 2018 +0100
@@ -16,7 +16,7 @@
 default settings are set (tip: unfortunately not in the EEPROM, but in the
 firmware).
 
-I've also digged a bit more for the sensibility problem on band 3. I still
+I've also digged a bit more for the sensitivity problem on band 3. I still
 haven't foudn yet the true culprit, but now I have a few tracks to follow.
 
 I've been in the process of disassembling a part of the firware to look for
diff -r d676fee7e960 -r 4d8bca9ff106 content/eip545b_3.rst
--- a/content/eip545b_3.rst	Thu Feb 15 18:48:46 2018 +0100
+++ b/content/eip545b_3.rst	Tue Feb 27 23:32:21 2018 +0100
@@ -149,6 +149,8 @@
 0x0D is used for at address 0x005E.
 
 
+.. _sensitivity-problem:
+
 The sensitivity problem
 =======================