diff -r 33cd55d481ba -r 6b6e13653348 content/hp5334a.rst
--- a/content/hp5334a.rst	Wed Oct 16 21:52:38 2019 +0200
+++ b/content/hp5334a.rst	Wed Oct 16 21:53:47 2019 +0200
@@ -12,12 +12,12 @@
 optinal DVM, and an optional oven controlled
 oscillator. Unfortunately, my meter has no option at all.
 
-.. image:: {filename}images/hp5334a/front.jpg
+.. image:: {static}images/hp5334a/front.jpg
    :alt: My HP5334A Universal Counter
       
 There is a nice quick instruction set printed on the top cover:
 
-.. image:: {filename}images/hp5334a/top.jpg
+.. image:: {static}images/hp5334a/top.jpg
    :alt: HP5334A Quick Instruction Set
 
 
@@ -32,20 +32,20 @@
 
 When removing the covers, one can see:
 
-.. image:: {filename}/images/hp5334a/pcb.jpg
+.. image:: {static}/images/hp5334a/pcb.jpg
    :alt: The top view of the PCB.
 	   
 with a very nice star-shaped ground lattice. Among other interesting
 things are these funny little variable caps:
 
-.. image:: {filename}/images/hp5334a/c89.jpg
+.. image:: {static}/images/hp5334a/c89.jpg
    :alt: C89, a nice little variable cap.
 
 And as one may expect in such a device, no fan.
 	 
 The bottom side of the PCB looks like:
 	 
-.. image:: {filename}/images/hp5334a/pcb_bottom.jpg
+.. image:: {static}/images/hp5334a/pcb_bottom.jpg
    :alt: The bottom view of the PCB.
 	 
 Adjustment
@@ -60,7 +60,7 @@
 
 And it was not so out of specs:
 
-.. image:: {filename}/images/hp5334a/uncal.jpg
+.. image:: {static}/images/hp5334a/uncal.jpg
    :alt: Measuring a 1kHz reference
 
 In this picture, the signal is a 1kHz sine wave generated by a
@@ -79,7 +79,7 @@
 delay has been set to 1s, as described in the service manual when
 adjusting the oscillator):
 
-.. image:: {filename}/images/hp5334a/cal.jpg
+.. image:: {static}/images/hp5334a/cal.jpg
    :alt: After adjustement against the rubidium reference standard.
 
 The adjustment capacitor is not fine enough to reach a spot 10MHz
@@ -91,5 +91,5 @@
 off, something like 0.05 ppm).
 
 
-.. _`Efratom 10MHz reference standard`: {filename}/10MHz_ref.rst
-.. _HP8904A: {filename}/hp8904a.rst
+.. _`Efratom 10MHz reference standard`: {static}/10MHz_ref.rst
+.. _HP8904A: {static}/hp8904a.rst