diff -r 33cd55d481ba -r 6b6e13653348 content/TeK2445_2.rst
--- a/content/TeK2445_2.rst	Wed Oct 16 21:52:38 2019 +0200
+++ b/content/TeK2445_2.rst	Wed Oct 16 21:53:47 2019 +0200
@@ -9,10 +9,10 @@
 :series_index: 2
 
 After a `quick repair of the PSU of my Tek 2445
-<{filename}/TeK2445.rst>`_, I've started a more systematic replacement
+<{static}/TeK2445.rst>`_, I've started a more systematic replacement
 of the capacitors.
 
-.. image:: {filename}/images/tek2445/psu_caps_replaced.jpg
+.. image:: {static}/images/tek2445/psu_caps_replaced.jpg
    :alt: Tek2445 PSU Caps being replaced.
 
 But I was also a bit worried because of a dirty noise coming from the
@@ -46,7 +46,7 @@
 hey, there is no way higher ESR could lead to overcurrent flowing
 through this resistor).
 
-.. image:: {filename}/images/tek2445/psu_prereg.png
+.. image:: {static}/images/tek2445/psu_prereg.png
    :alt: Schematic of the preregulator of teh Tek2445
 
 But powering up and down the PSU again and again, with its freaking
@@ -57,7 +57,7 @@
 exact specifications of the device; the service manual do not give the
 value of the resistor in parallel with the 2.5µH inductance.
 
-.. image:: {filename}/images/tek2445/dead_transistors.jpg
+.. image:: {static}/images/tek2445/dead_transistors.jpg
    :alt: Q1050, 1060 and Q1070 are dead.
       
 For now, I've picked up a 3W 100Ω resistor and I've made a self by
@@ -77,7 +77,7 @@
 died. The transistor is a 2N3905 (which I don't have around either) so
 I've replaced it with a bigger TIP32C.
 
-.. image:: {filename}/images/tek2445/beafier_transistors.jpg
+.. image:: {static}/images/tek2445/beafier_transistors.jpg
    :alt: Beafier replacement rtansistors, and a handmade coil.
 
 From there, I began to check most of the components in this
@@ -89,7 +89,7 @@
 behavior of the Q1020/Q1021 stage. Their purpose is to regulate the
 supply voltage for the U1030 main oscillator.
 
-.. image:: {filename}/images/tek2445/psu_prereg_test.jpg
+.. image:: {static}/images/tek2445/psu_prereg_test.jpg
    :alt: Testing the main control oscillator.
 
 At power-up time, when the oscillator has not yet started, R1020 fill