--- a/content/hp8662a_3.rst Thu Nov 05 22:14:33 2020 +0100
+++ b/content/hp8662a_3.rst Thu Nov 05 22:15:16 2020 +0100
@@ -11,7 +11,7 @@
This is the part 3 on my series about my HP 8662A Signal Generator, and is
about the third main problems I found with this unit, as evocated in `part
-2 <{static}hp8662a_2.rst>`_: Error 04 is lit and there are some very
+2 <{filename}/hp8662a_2.rst>`_: Error 04 is lit and there are some very
unpleasant spectrums at some frequencies.
@@ -24,7 +24,7 @@
procedure to follow in on the Service Sheet H. The general block diagram of
this section is as follow:
-.. image:: {static}images/hp8662a/LF_block_diagram.png
+.. image:: {static}/images/hp8662a/LF_block_diagram.png
:class: image-process-large-photo
This Low Frequency Section consists in no less than 4 phase locked loops in
@@ -37,23 +37,25 @@
consists in 11 digits, named DF0 to DF10, which are segmented to control
several sets of PLLs:
-:DF0 - DF2: are the fractional part of the fractional N-Loop (.1Hz, 1Hz and
- 10Hz digits),
-
-:DF3 - DF5: are the integer part of the fractional N-loop (100Hz, 1kHz and
- 10kHz resolutions)
-
-:DF6 - DF7: are used to set the pretune VCO value for the sum loop VCO (A3A7),
- the FM sum loop VCO (A3A8) as well as the N-Loop VCO (A3A4). These
- are the 0.1MHz and 1MHz resolution digits.
-
-:DF8 - DF9: these control the high frequency section (DF10 can only be 0 or 1,
- in which case the frequency doubler is used).
+========= =====================================================================
+:DF0-DF2: are the fractional part of the fractional N-Loop (.1Hz, 1Hz and
+ 10Hz digits),
+--------- ---------------------------------------------------------------------
+:DF3-DF5: are the integer part of the fractional N-loop (100Hz, 1kHz and
+ 10kHz resolutions)
+--------- ---------------------------------------------------------------------
+:DF6-DF7: are used to set the pretune VCO value for the sum loop VCO (A3A7),
+ the FM sum loop VCO (A3A8) as well as the N-Loop VCO (A3A4). These
+ are the 0.1MHz and 1MHz resolution digits.
+--------- ---------------------------------------------------------------------
+:DF8-DF9: these control the high frequency section (DF10 can only be 0 or 1,
+ in which case the frequency doubler is used).
+========= =====================================================================
Here is a more detailed vue of the block diagram of the low frequency section:
-.. image:: {static}images/hp8662a/sheet_H.png
+.. image:: {static}/images/hp8662a/sheet_H.png
:class: image-process-large-photo
