--- a/content/10MHz_ref_2.rst	Wed Oct 16 21:52:38 2019 +0200
+++ b/content/10MHz_ref_2.rst	Wed Oct 16 21:53:47 2019 +0200
@@ -17,14 +17,14 @@
 Desoldering and soldering SMD parts without an air flow station is a
 bit tricky, but eventually I succeded in replacing the broken inductor.
 
-.. image:: {filename}/images/freq_ref/extron_fixed.jpg
+.. image:: {static}/images/freq_ref/extron_fixed.jpg
 	   :alt: The Extron Video Distribution Amplifier fixed with a
                  new inductor for its small DC-DC converter.
 
 Now the "video" amplifier works like a charm. The 10MHz signal is
 nicely amplified:
 
-.. image:: {filename}/images/freq_ref/extron_working_10MHz.jpg
+.. image:: {static}/images/freq_ref/extron_working_10MHz.jpg
 	   :alt: The Extron Video Distribution Amplifier dispatching a
                  10MHz signal to several equipments.
 
@@ -34,7 +34,7 @@
 using the input of my scope set at 50ohm) that the amplification
 factor is exactly x2.
 
-.. image:: {filename}/images/freq_ref/extron_dephasing_10MHz.jpg
+.. image:: {static}/images/freq_ref/extron_dephasing_10MHz.jpg
 	   :alt: The Extron Video Distribution Amplifier dephasing at 10MHz.
 
 What I need to check carefully now is if all the outputs of the
@@ -54,4 +54,4 @@
 .. _`new thread on the EEVBlog`: http://www.eevblog.com/forum/projects/distribution-amp-%28for-reference-frequency-standard-or-otherwise%29/msg893851/
 
 
-.. _`first part`: {filename}/10MHz_ref.rst
+.. _`first part`: {static}/10MHz_ref.rst