14 I have now been able to run the power meter at full resolution (even if it's |
14 I have now been able to run the power meter at full resolution (even if it's |
15 very out of calibration), and have been able to locate where these annoying |
15 very out of calibration), and have been able to locate where these annoying |
16 default settings are set (tip: unfortunately not in the EEPROM, but in the |
16 default settings are set (tip: unfortunately not in the EEPROM, but in the |
17 firmware). |
17 firmware). |
18 |
18 |
19 I've also digged a bit more for the sensibility problem on band 3. I still |
19 I've also digged a bit more for the sensitivity problem on band 3. I still |
20 haven't foudn yet the true culprit, but now I have a few tracks to follow. |
20 haven't foudn yet the true culprit, but now I have a few tracks to follow. |
21 |
21 |
22 I've been in the process of disassembling a part of the firware to look for |
22 I've been in the process of disassembling a part of the firware to look for |
23 these default settings as well as how to activate the power meter. This latter |
23 these default settings as well as how to activate the power meter. This latter |
24 was in fact already activated (but with 3dB resolution, since A107 had no |
24 was in fact already activated (but with 3dB resolution, since A107 had no |