--- a/gpib.py Sat Jan 26 11:39:30 2008 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,64 +0,0 @@
-"""
-gpib: create serial connection to GPIB-USB device (ProLogix is the
-only supported device for now).
-"""
-import serial
-from serial.serialutil import SerialException
-import time
-
-class ConnectionError(Exception):
- pass
-
-class Constants(object):
- def __init__(self):
- self.constants = {}
- self.descriptions = {}
- self.rev_constants = {}
- for v, k, m in self._constants:
- self.k = v
- self.constants[v] = k
- self.rev_constants[k] = v
- self.descriptions[v] = m
-
- def __getitem__(self, k):
- if isinstance(k, basestring):
- return self.rev_constants[k]
- else:
- return self.constants[k]
-
- def get_description(self, k):
- if isinstance(k, basestring):
- k = self.rev_constants[k]
- return self.descriptions[k]
-
-
-class MODE(Constants):
- _constants = [(1, "CONTROLLER", "Set device as Controller in Charge"),
- (0, "DEVICE", "Set device as simple listener"),
- ]
-# TODO
-# class STATUS_BYTE(Constants):
-# # IEEE 488.2 Status Byte constants
-# MAV = 0x10 # Message AVailable: bit 4 of the Status Byte
-# ESB = 0x20 # Event Status Bit: bit 5 of the Status Byte
-# MSS = 0x40 # Master Summary Status bit: bit 6 of the Status Byte (NOT
-# # sent in response to a serial poll)
-# RQS = 0x40 # Request Service: bit 6 of the Status Byte (when sent in
-# # response to a serial poll)
-# class SESR(Constants):
-# # SESR constants (Standard Event Status Register)
-# PON = 0x80 # Power On: Power has been turned On since last register
-# # read access
-# URQ = 0x40 # User Request: the user has activated some device control
-# # (whatever the Remote Local state is)
-# CME = 0x20 # Command Error
-# EXE = 0x10 # Execution Error
-# DDE = 0x08 # Device Dependant Error
-# QYE = 0x04 # QuerY Error (attempt to read data while Output Queue is
-# # empty, or data in the OQ was lost)
-# RQC = 0x02 # Request Control: tell the CiC that the device wants to
-# # become the CiC
-# OPC = 0x01 # Operation Complete: device has completed any pending
-# # operation (ready to accept new commands). This bit is
-# # generated in response to a OPC command.
- 