Mercurial > hp34970-firmware / changeset

--- a/README	Mon Nov 23 21:57:06 2020 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,12 +0,0 @@
-Use mbed 5.14
-
-For some reason I had to disable mbed-client-cli/ (multiple definition of `cmd' error at
-link time).
-Put a .mbedignore file in:
-
-$ cd /home/david/.platformio/packages/framework-mbed@6.51504.200716/features
-$ cat .mbedignore
-mbed-client-cli/*
-frameworks/mbed-client-cli/*
-
-see https://docs.platformio.org/en/latest/frameworks/mbed.html#ignoring-particular-components

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.md	Mon Nov 23 22:22:37 2020 +0100
@@ -0,0 +1,79 @@
+# Replacement front panel for the HP/Agilent 34970A - firmware
+
+This repository contains the firmware for the replacement front panel for the
+HP 34970A acuisition unit described
+[here](https://whatever.sdfa3.org/hp-34970a-data-acquisition-unit-part-5.html)
+
+It is based on the [Mbed-os](https://os.mbed.com) framework and uses the
+[platformio](https://platformio.org/) development environment.
+
+Make sure to have this later properly installed (I suggest you install it in a
+Python 3 virtualenv).
+
+The firmware has been developped using platformio version 5.0.3 and Mbed-os 6.2.
+
+## Compilation
+
+It should be a simple matter of calling:
+
+```
+(pio3) ~/p/p/hp34970disp$ pio run -e fp_dfu
+[...]
+Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
+RAM:   [==        ]  21.4% (used 14048 bytes from 65536 bytes)
+Flash: [==        ]  22.9% (used 90040 bytes from 393216 bytes)
+========================================== [SUCCESS] Took 28.13 seconds ==========================================
+
+Environment    Status    Duration
+-------------  --------  ------------
+fp_dfu         SUCCESS   00:00:28.129
+========================================== 1 succeeded in 00:00:28.129 ==========================================
+
+```
+
+Note: the `platformio.ini` provides 2 similar environments (`fp_dfu` and
+`fp_stlink`) which are identical but the `upload_protocol`.
+
+## Uploading the firmware
+
+You can upload the firmware either via the (USB) DFU mode or the SWD/STLink
+port on the PCB. Note that the USB socket on the PCB does not power the board,
+so it must be already powered (which is typically when the board is connected
+to the main CPU board of the HP 34970A).
+
+In order to be able to upload the firware by DFU, the STM32 MCU on the front
+panel must be booted in DFU mode, which can be done by pressing the DFU button,
+then the RESET button while keeping the DFU pressed.
+
+The STLink upload method does not need the board o be booted in DFU mode.
+
+```
+(pio3) ~/p/p/hp34970disp$ pio run -e fp_dfu -t upload
+```
+
+or
+
+```
+(pio3) ~/p/p/hp34970disp$ pio run -e fp_stlink -t upload
+```
+
+## Credits
+
+THis firmware uses a modified version of the [UniGraphic]() library and the
+[QEI]() library.
+
+
+## Notes (deprecated)
+
+Use mbed 6
+
+For some reason I had to disable mbed-client-cli/ (multiple definition of `cmd' error at
+link time).
+Put a .mbedignore file in:
+
+$ cd /home/david/.platformio/packages/framework-mbed@6.51504.200716/features
+$ cat .mbedignore
+mbed-client-cli/*
+frameworks/mbed-client-cli/*
+
+see https://docs.platformio.org/en/latest/frameworks/mbed.html#ignoring-particular-components