diff -r 276195d58a1d -r 71be284c66b3 TARGET_HP34970_FP_F303RD/STM32F303XE.ld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_HP34970_FP_F303RD/STM32F303XE.ld	Sun Oct 25 17:02:53 2020 +0100
@@ -0,0 +1,203 @@
+/* Linker script to configure memory regions. */
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2016-2020 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+*/
+
+#include "cmsis_nvic.h"
+
+
+#if !defined(MBED_APP_START)
+  #define MBED_APP_START  MBED_ROM_START
+#endif
+
+#if !defined(MBED_APP_SIZE)
+  #define MBED_APP_SIZE  MBED_ROM_SIZE
+#endif
+
+#if !defined(MBED_BOOT_STACK_SIZE)
+    /* This value is normally defined by the tools
+       to 0x1000 for bare metal and 0x400 for RTOS */
+    #define MBED_BOOT_STACK_SIZE  0x400
+#endif
+
+/* Round up VECTORS_SIZE to 8 bytes */
+#define VECTORS_SIZE  (((NVIC_NUM_VECTORS * 4) + 7) & 0xFFFFFFF8)
+
+MEMORY
+{
+    FLASH (rx)   : ORIGIN = MBED_APP_START, LENGTH = MBED_APP_SIZE
+    RAM (rwx)    : ORIGIN = MBED_RAM_START + VECTORS_SIZE, LENGTH = MBED_RAM_SIZE - VECTORS_SIZE
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ *   _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .text :
+    {
+        KEEP(*(.isr_vector))
+        *(.text*)
+
+        KEEP(*(.init))
+        KEEP(*(.fini))
+
+        /* .ctors */
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+
+        /* .dtors */
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+
+        *(.rodata*)
+
+        KEEP(*(.eh_frame*))
+    } > FLASH
+
+    .ARM.extab :
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+
+    __etext = .;
+    _sidata = .;
+
+    .data : AT (__etext)
+    {
+        __data_start__ = .;
+        _sdata = .;
+        *(vtable)
+        *(.data*)
+
+        . = ALIGN(8);
+        /* preinit data */
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+
+        . = ALIGN(8);
+        /* init data */
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE_HIDDEN (__init_array_end = .);
+
+        . = ALIGN(8);
+        /* finit data */
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE_HIDDEN (__fini_array_end = .);
+
+        KEEP(*(.jcr*))
+        . = ALIGN(8);
+        /* All data end */
+        __data_end__ = .;
+        _edata = .;
+
+    } > RAM
+
+    /* Uninitialized data section
+     * This region is not initialized by the C/C++ library and can be used to
+     * store state across soft reboots. */
+    .uninitialized (NOLOAD):
+    {
+        . = ALIGN(32);
+        __uninitialized_start = .;
+        *(.uninitialized)
+        KEEP(*(.keep.uninitialized))
+        . = ALIGN(32);
+        __uninitialized_end = .;
+    } > RAM
+
+    .bss :
+    {
+        . = ALIGN(8);
+        __bss_start__ = .;
+        _sbss = .;
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(8);
+        __bss_end__ = .;
+        _ebss = .;
+    } > RAM
+
+    .heap (COPY):
+    {
+        __end__ = .;
+        PROVIDE(end = .);
+        *(.heap*)
+        . = ORIGIN(RAM) + LENGTH(RAM) - MBED_BOOT_STACK_SIZE;
+        __HeapLimit = .;
+    } > RAM
+
+    /* .stack_dummy section doesn't contains any symbols. It is only
+     * used for linker to calculate size of stack sections, and assign
+     * values to stack symbols later */
+    .stack_dummy (COPY):
+    {
+        *(.stack*)
+    } > RAM
+
+    /* Set stack top to end of RAM, and stack limit move down by
+     * size of stack_dummy section */
+    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+    _estack = __StackTop;
+    __StackLimit = __StackTop - MBED_BOOT_STACK_SIZE;
+    PROVIDE(__stack = __StackTop);
+
+    /* Check if data + heap + stack exceeds RAM limit */
+    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}