Mercurial > hp34970-firmware / changelog

Add a few patterns in hgignore draft

• Sun, 25 Oct 2020 17:12:22 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 17:12:22 +0100] rev 31
• Add a few patterns in hgignore

Update the custom target HP34970_FP_303RD draft

• Sun, 25 Oct 2020 17:02:53 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 17:02:53 +0100] rev 30
• Update the custom target HP34970_FP_303RD
  
  update the platformio.ini:
  remove unused flags, and configure so it uses includes from the project's root
  directory (in TARGET_HP34970_FP_F303RD) so these .h/.c files do not conflict
  when compiling for other targets.
  
  Add a TARGET_HP34970_FR_F303RD/ for target specific headers/linker files.
  Add a src/TARGET_HP34970_FR_F303RD/ for c files (protected by '#if defined'
  statments).

Set custom_config for the F303RD draft

• Sun, 25 Oct 2020 16:58:38 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 16:58:38 +0100] rev 29
• Set custom_config for the F303RD
  
  - remove "supported_form_factors": irrelevant
  - rename as HP34970_FP_F303RD
  - enforce HSE_XTAL clock source
  - add USBDEVICE flag in device_had_add
  - set ROM size to 384ko

compile for nucleo f446re & f303re with mbed 6 draft

• Fri, 16 Oct 2020 22:08:47 +0200
• by David Douard <david.douard@sdfa3.org> [Fri, 16 Oct 2020 22:08:47 +0200] rev 28
• compile for nucleo f446re & f303re with mbed 6

add QEI draft

• Thu, 15 Oct 2020 01:12:31 +0200
• by David Douard <david.douard@sdfa3.org> [Thu, 15 Oct 2020 01:12:31 +0200] rev 27
• add QEI

Several stuff draft

• Thu, 15 Oct 2020 01:11:03 +0200
• by David Douard <david.douard@sdfa3.org> [Thu, 15 Oct 2020 01:11:03 +0200] rev 26
• Several stuff

Add .pio to hgignore draft

• Sun, 30 Aug 2020 22:53:15 +0200
• by David Douard <david.douard@sdfa3.org> [Sun, 30 Aug 2020 22:53:15 +0200] rev 25
• Add .pio to hgignore

Add the (missing?) Keypad lib draft

• Mon, 28 Jan 2019 21:51:45 +0100
• by David Douard <david.douard@logilab.fr> [Mon, 28 Jan 2019 21:51:45 +0100] rev 24
• Add the (missing?) Keypad lib

Add the serialdata tool draft

• Mon, 28 Jan 2019 21:50:09 +0100
• by David Douard <david.douard@logilab.fr> [Mon, 28 Jan 2019 21:50:09 +0100] rev 23
• Add the serialdata tool
  
  to read and decode serial data from the hp34970 using the dslogic.

more stuff draft

• Wed, 07 Nov 2018 20:00:52 +0100
• by David Douard <david.douard@logilab.fr> [Wed, 07 Nov 2018 20:00:52 +0100] rev 22
• more stuff

wip draft

• Mon, 05 Nov 2018 23:18:37 +0100
• by David Douard <david.douard@logilab.fr> [Mon, 05 Nov 2018 23:18:37 +0100] rev 21
• wip

add hgignore draft

• Tue, 05 Dec 2017 00:59:57 +0100
• by David Douard <david.douard@logilab.fr> [Tue, 05 Dec 2017 00:59:57 +0100] rev 20
• add hgignore

Stuff... draft

• Wed, 18 Jan 2017 23:19:13 +0100
• by David Douard <david.douard@logilab.fr> [Wed, 18 Jan 2017 23:19:13 +0100] rev 19
• Stuff...

[full replacement] implement a state machine for Rx draft

• Sat, 29 Oct 2016 23:44:31 +0200
• by David Douard <david.douard@logilab.fr> [Sat, 29 Oct 2016 23:44:31 +0200] rev 18
• [full replacement] implement a state machine for Rx

almost working... before killing the 87C51... draft

• Wed, 26 Oct 2016 22:41:16 +0200
• by David Douard <david.douard@logilab.fr> [Wed, 26 Oct 2016 22:41:16 +0200] rev 17
• almost working... before killing the 87C51...

[hp34comm] fix key stroke reception code draft

• Tue, 11 Oct 2016 21:49:43 +0200
• by David Douard <david.douard@logilab.fr> [Tue, 11 Oct 2016 21:49:43 +0200] rev 16
• [hp34comm] fix key stroke reception code
  
  was not correct

use A10 and D10 instead of D7 and D8 as dbg pins draft

• Tue, 11 Oct 2016 21:48:22 +0200
• by David Douard <david.douard@logilab.fr> [Tue, 11 Oct 2016 21:48:22 +0200] rev 15
• use A10 and D10 instead of D7 and D8 as dbg pins
  
  they don't seem to work (not sure why) on l432kc

define HAVE_PC to have a serial (debug) console draft

• Tue, 11 Oct 2016 21:47:10 +0200
• by David Douard <david.douard@logilab.fr> [Tue, 11 Oct 2016 21:47:10 +0200] rev 14
• define HAVE_PC to have a serial (debug) console

make USB (debug) serial console depend only on HAVE_PC compile variable draft

• Tue, 11 Oct 2016 21:46:27 +0200
• by David Douard <david.douard@logilab.fr> [Tue, 11 Oct 2016 21:46:27 +0200] rev 13
• make USB (debug) serial console depend only on HAVE_PC compile variable

typo draft

• Tue, 11 Oct 2016 21:45:22 +0200
• by David Douard <david.douard@logilab.fr> [Tue, 11 Oct 2016 21:45:22 +0200] rev 12
• typo

HP_TX is now useless draft

• Tue, 11 Oct 2016 21:44:56 +0200
• by David Douard <david.douard@logilab.fr> [Tue, 11 Oct 2016 21:44:56 +0200] rev 11
• HP_TX is now useless

foldme draft

• Tue, 11 Oct 2016 21:44:04 +0200
• by David Douard <david.douard@logilab.fr> [Tue, 11 Oct 2016 21:44:04 +0200] rev 10
• foldme

use only one USART draft

• Tue, 11 Oct 2016 00:46:18 +0200
• by David Douard <david.douard@logilab.fr> [Tue, 11 Oct 2016 00:46:18 +0200] rev 9
• use only one USART
  
  with a front "AND" gate to combine both serial lines

pff so many stuff draft

• Tue, 11 Oct 2016 00:14:20 +0200
• by David Douard <david.douard@logilab.fr> [Tue, 11 Oct 2016 00:14:20 +0200] rev 8
• pff so many stuff
  
  let's break everything again