Mercurial > hp34970-firmware / changelog

fox the example sigrock-cli cmd line for reading serial session from the dslogic draft

• Sun, 01 Nov 2020 22:13:03 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 01 Nov 2020 22:13:03 +0100] rev 42
• fox the example sigrock-cli cmd line for reading serial session from the dslogic

rename fp environment as fp_dfu and add a fp_stlink draft

• Sun, 01 Nov 2020 22:11:39 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 01 Nov 2020 22:11:39 +0100] rev 41
• rename fp environment as fp_dfu and add a fp_stlink
  
  to make it a bit easier to choose the selected upload protocol

SSD1322: add power off/on methods draft

• Sun, 01 Nov 2020 22:10:10 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 01 Nov 2020 22:10:10 +0100] rev 40
• SSD1322: add power off/on methods

hp34comm: add support for boot keycode draft

• Tue, 27 Oct 2020 21:48:28 +0100
• by David Douard <david.douard@sdf3.org> [Tue, 27 Oct 2020 21:48:28 +0100] rev 39
• hp34comm: add support for boot keycode

kill tabs (again) in src/main.cpp draft

• Mon, 26 Oct 2020 00:23:55 +0100
• by David Douard <david.douard@sdf3.org> [Mon, 26 Oct 2020 00:23:55 +0100] rev 38
• kill tabs (again) in src/main.cpp

Extracted the display related functions in a Display class draft

• Mon, 26 Oct 2020 00:16:13 +0100
• by David Douard <david.douard@sdf3.org> [Mon, 26 Oct 2020 00:16:13 +0100] rev 37
• Extracted the display related functions in a Display class

Add support for the shift flag draft

• Sun, 25 Oct 2020 23:00:17 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 23:00:17 +0100] rev 36
• Add support for the shift flag

Indent src/main.cpp with 2-ws draft

• Sun, 25 Oct 2020 22:45:24 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 22:45:24 +0100] rev 35
• Indent src/main.cpp with 2-ws

Add a key mapping table (protocol value vs. raw keycode) and send it draft

• Sun, 25 Oct 2020 22:17:15 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 22:17:15 +0100] rev 34
• Add a key mapping table (protocol value vs. raw keycode) and send it
  
  Also reformat the file for 2-wspace-tabs

Reformat Keypad.cpp draft

• Sun, 25 Oct 2020 22:15:35 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 22:15:35 +0100] rev 33
• Reformat Keypad.cpp

Update the main code: extract headers and use a CircularBuffer for key events draft

• Sun, 25 Oct 2020 22:15:03 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 22:15:03 +0100] rev 32
• Update the main code: extract headers and use a CircularBuffer for key events
  
  Also fix some forgotten s/_FP_F303RE/_FP_F030RD/

Add a few patterns in hgignore draft

• Sun, 25 Oct 2020 17:12:22 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 17:12:22 +0100] rev 31
• Add a few patterns in hgignore

Update the custom target HP34970_FP_303RD draft

• Sun, 25 Oct 2020 17:02:53 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 17:02:53 +0100] rev 30
• Update the custom target HP34970_FP_303RD
  
  update the platformio.ini:
  remove unused flags, and configure so it uses includes from the project's root
  directory (in TARGET_HP34970_FP_F303RD) so these .h/.c files do not conflict
  when compiling for other targets.
  
  Add a TARGET_HP34970_FR_F303RD/ for target specific headers/linker files.
  Add a src/TARGET_HP34970_FR_F303RD/ for c files (protected by '#if defined'
  statments).

Set custom_config for the F303RD draft

• Sun, 25 Oct 2020 16:58:38 +0100
• by David Douard <david.douard@sdf3.org> [Sun, 25 Oct 2020 16:58:38 +0100] rev 29
• Set custom_config for the F303RD
  
  - remove "supported_form_factors": irrelevant
  - rename as HP34970_FP_F303RD
  - enforce HSE_XTAL clock source
  - add USBDEVICE flag in device_had_add
  - set ROM size to 384ko

compile for nucleo f446re & f303re with mbed 6 draft

• Fri, 16 Oct 2020 22:08:47 +0200
• by David Douard <david.douard@sdfa3.org> [Fri, 16 Oct 2020 22:08:47 +0200] rev 28
• compile for nucleo f446re & f303re with mbed 6

add QEI draft

• Thu, 15 Oct 2020 01:12:31 +0200
• by David Douard <david.douard@sdfa3.org> [Thu, 15 Oct 2020 01:12:31 +0200] rev 27
• add QEI

Several stuff draft

• Thu, 15 Oct 2020 01:11:03 +0200
• by David Douard <david.douard@sdfa3.org> [Thu, 15 Oct 2020 01:11:03 +0200] rev 26
• Several stuff

Add .pio to hgignore draft

• Sun, 30 Aug 2020 22:53:15 +0200
• by David Douard <david.douard@sdfa3.org> [Sun, 30 Aug 2020 22:53:15 +0200] rev 25
• Add .pio to hgignore

Add the (missing?) Keypad lib draft

• Mon, 28 Jan 2019 21:51:45 +0100
• by David Douard <david.douard@logilab.fr> [Mon, 28 Jan 2019 21:51:45 +0100] rev 24
• Add the (missing?) Keypad lib

Add the serialdata tool draft

• Mon, 28 Jan 2019 21:50:09 +0100
• by David Douard <david.douard@logilab.fr> [Mon, 28 Jan 2019 21:50:09 +0100] rev 23
• Add the serialdata tool
  
  to read and decode serial data from the hp34970 using the dslogic.

more stuff draft

• Wed, 07 Nov 2018 20:00:52 +0100
• by David Douard <david.douard@logilab.fr> [Wed, 07 Nov 2018 20:00:52 +0100] rev 22
• more stuff

wip draft

• Mon, 05 Nov 2018 23:18:37 +0100
• by David Douard <david.douard@logilab.fr> [Mon, 05 Nov 2018 23:18:37 +0100] rev 21
• wip

add hgignore draft

• Tue, 05 Dec 2017 00:59:57 +0100
• by David Douard <david.douard@logilab.fr> [Tue, 05 Dec 2017 00:59:57 +0100] rev 20
• add hgignore

Stuff... draft

• Wed, 18 Jan 2017 23:19:13 +0100
• by David Douard <david.douard@logilab.fr> [Wed, 18 Jan 2017 23:19:13 +0100] rev 19
• Stuff...