--- a/lib/unigraphic/SPI8.h Fri Sep 23 21:12:43 2016 +0200
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,148 +0,0 @@
-#ifndef SPI8_H
-#define SPI8_H
-
-#define NDEBUG // avoid MBED_ASSERT to halt process when PinName DC==NC
-
-#include "mbed.h"
-#include "Protocols.h"
-//#include "GraphicsDisplay.h"
-
-/** SPI 8bit interface
-*/
-class SPI8 : public Protocols
-{
- public:
-
- /** Create an SPI 8bit display interface with 3 control pins
- *
- * @param SPI mosi
- * @param SPI miso
- * @param SPI sclk
- * @param CS pin connected to CS of display
- * @param reset pin connected to RESET of display
- * @param DC pin connected to data/command of display
- */
- SPI8(int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC=NC);
-
-protected:
-
- /** Send 8bit command to display controller
- *
- * @param cmd: byte to send
- *
- */
- virtual void wr_cmd8(unsigned char cmd);
-
- /** Send 8bit data to display controller
- *
- * @param data: byte to send
- *
- */
- virtual void wr_data8(unsigned char data);
-
- /** Send 2x8bit command to display controller
- *
- * @param cmd: halfword to send
- */
- virtual void wr_cmd16(unsigned short cmd);
-
- /** Send 2x8bit data to display controller
- *
- * @param data: halfword to send
- *
- */
- virtual void wr_data16(unsigned short data);
-
- /** Send 16bit pixeldata to display controller
- *
- * @param data: halfword to send
- *
- */
- virtual void wr_gram(unsigned short data);
-
- /** Send same 16bit pixeldata to display controller multiple times
- *
- * @param data: halfword to send
- * @param count: how many
- *
- */
- virtual void wr_gram(unsigned short data, unsigned int count);
-
- /** Send array of pixeldata shorts to display controller
- *
- * @param data: unsigned short pixeldata array
- * @param lenght: lenght (in shorts)
- *
- */
- virtual void wr_grambuf(unsigned short* data, unsigned int lenght);
-
- /** Read 16bit pixeldata from display controller (with dummy cycle)
- *
- * @param convert true/false. Convert 18bit to 16bit, some controllers returns 18bit
- * @returns 16bit color
- */
- virtual unsigned short rd_gram(bool convert);
-
- /** Read 4x8bit register data (with dummy cycle)
- * @param reg the register to read
- * @returns data as uint
- *
- */
- virtual unsigned int rd_reg_data32(unsigned char reg);
-
- /** Read 3x8bit ExtendedCommands register data
- * @param reg the register to read
- * @param SPIreadenablecmd vendor/device specific cmd to read EXTC registers
- * @returns data as uint
- * @note EXTC regs (0xB0 to 0xFF) are read/write registers but needs special cmd to be read in SPI mode
- */
- virtual unsigned int rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd);
-
- /** ILI932x specific, does a dummy read cycle, number of bits is protocol dependent
- * for PAR protocols: a signle RD bit toggle
- * for SPI8: 8clocks
- * for SPI16: 16 clocks
- */
- virtual void dummyread ();
-
- /** ILI932x specific, select register for a successive write or read
- *
- * @param reg register to be selected
- * @param forread false = a write next (default), true = a read next
- * @note forread only used by SPI protocols
- */
- virtual void reg_select(unsigned char reg, bool forread =false);
-
- /** ILI932x specific, write register with data
- *
- * @param reg register to write
- * @param data 16bit data
- */
- virtual void reg_write(unsigned char reg, unsigned short data);
-
- /** ILI932x specific, read register
- *
- * @param reg register to be read
- * @returns 16bit register value
- */
- virtual unsigned short reg_read(unsigned char reg);
-
- /** HW reset sequence (without display init commands)
- */
- virtual void hw_reset();
-
- /** Set ChipSelect high or low
- * @param enable 0/1
- */
- virtual void BusEnable(bool enable);
-
- DigitalOut _CS;
-
-private:
-
- SPI _spi;
- DigitalOut _reset;
- DigitalOut _DC;
-
-};
-#endif